Jack Hammer
Order processing: From 7 to 10 business days.
Shipping: From 2 to 4 business days.
By purchasing this product you agree to our shipping requirements. See the Shipping Policy for more details.
Due to the nature of the product, refunds or returns are not available. See the Return & Refund Policy for more information.
WARNING: This product is capable of producing high pressure. By the purchase of this device, you are acknowledging you are aware of the risks while using and/or mis-using this product. Remove immediately and restore circulation if numbness, excess cold, tingling, pain, or color change to blue/black is observed.
About the Jack Hammer
All new ADS system with AirLock® technology. The Jack Hammer is our solution to stealth length enlargement. Just slip it on, pump, and go.
FG-JH
- Width: 2.5 in / 6.35 cm
- Height: 2.25 in / 5.715 cm
- Opening width: 1.5 in / 3.81 cm
2 lb / 0.9 kg
- Solid steel
- Premium medical grade silicon
Yes
Yes
5 lb / 2.26 kg
Yes
4.75 in / 12.1 cm
No
Included in the box
Jack Hammer Assembly
Designed to be worn under clothing for stealth all day wear
Created by a research and development medical device designer with over 25 years of PE experience.
Simple
The device is designed for ease of use, with a focus on new PE users. Operation is one handed, universal, with a single knob to control pressure. Built strong for long all day stretching sessions.
Quality components
Made in the USA. Constructed of heavy duty machined components and medical grade parts, the device is designed for long term PE career use. The modular design can be repaired and upgraded as well, providing more value for your money.
Airlock® Technology
No hard points to pinch your skin or press on delicate nerves like compression clamp hangers.
Unlike the cheap toys you may find online made from toxic chemicals, all components are made from the same type of silicone featured in Hollywood special effects makeup.
Instant adjustment, even while wearing under clothes
The long air hose allows you to place in a pocket or trim it down to snake down your pant leg to reach discreetly to adjust grip immediately. Placed in a pocket, the air hose can hold the device in case it slips off.
2
Pounds
Device weight with hanger attachment
5
Pounds
Max weight on hanger attachment
Hang using the included 2 pound metal frame, add even more weight* hung from the included hanger attachment, or attach to a pulley setup* so you can "hang" straight out while sitting in comfort.
*Sold separately
Designed for the well proven lengthening method found in the industry's best hangers and extender devices.
Adjustable air pressure allows for a max grip and best fit every time. Suggested use is to wear as many hours of daily wear as possible for best results. No vacuum cup to cause pain or blistering.
Hang using the included 2 pound metal frame, add even more weight* hung from the included hanger attachment, or attach to a pulley setup* so you can "hang" straight out while sitting in comfort.
*Sold separately
Designed for the well proven lengthening method found in the industry's best hangers and extender devices.
Adjustable air pressure allows for a max grip and best fit every time. Suggested use is to wear as many hours of daily wear as possible for best results. No vacuum cup to cause pain or blistering.
Operation Instructions
WARNING: Any numbness, tingling, excess coldness, or color changes to blue/black should not be ignored and are signs to release air pressure and remove the device as soon as possible. Restore circulation before continuing to use the product.
Step 1
Make sure the knob is set to the OFF (left, counter-clockwise position) and all air has left the device.
Step 2
Be partly or fully soft/flaccid to insert into the device. Device should be used dry. You can use soapy water to aid with lubrication for insertion, but be sure to dry off fully. Using lotions may cause slippage during operation.
Step 3
If uncircumcised (uncut), be sure the foreskin is covering the head (glans) and insert it into the opening. The head will pop out of the foreskin on the other side of the clamp opening. If circumcised, use two fingers to compress and pull the head through the device opening. Soapy water can be used to lubricate the device opening for easier insertion. Remember to dry off the water before step 4.
Step 4
Slide the device all the way down to the shaft base, resting at the bottom.
Step 5
Gently turn the knob to the ON (right, clockwise position) to close the air valve. Do not overtighten the knob as it can damage the air valve.
Step 6
Slightly pump the device's air bulb to form a seal around the shaft. Observe for leakage or misalignment.
Step 7
Pump the air bulb until a solid grip pressure is felt on the shaft. No pain should be felt. NEVER pump to maximum pressure!
Step 8
Gently apply tension to test grip strength before adding any weight or letting it hang by itself from the shaft.
Step 9
If this is your first time using, carefully lower the weight by itself (nothing attached to the hook) testing the grip strength as it's lowered. Be aware of your feet and other objects beneath the weight and protect as needed. The device is meant for long hours of wear, so avoid the temptation to use more than 4-6 lbs in total weight including the 2 lb frame. The device is not designed as a compression/heavy weight hanger. Loading more weight does not speed up results and can potentially cause injury.
Step 10
Do not adjust device air pressure unless pressure loss or slippage is felt. If you begin to get erect while wearing, release the air pressure and let it pass and focus on the erection subsiding. Do not get fully erect in the device if possible. The air bulb must remain plugged into the device for it to operate as advertised.
Step 11
Be on constant watch for any signs of pain, tingling, numbness, excess cold, or color changes to blue/black. Should you sense any of these signs, release air pressure and remove the device immediately to restore circulation. As you become familiar with the device, releasing just the air pressure will work to restore circulation. If sitting, hang the device over the edge of the chair to keep constant tension. The device works best while standing/walking when worn under clothing.
Step 12
To remove, use soapy water around the opening and shaft for lubrication. Wash device before re-use with mild dish washing liquid, no hard chemicals that may damage silicone.
Step 13
Should you need to urinate with the device on; hold the device up with one hand and release the air with the other hand. Urinate, then add air pressure again to grip the penis. Lower the device down.
Step 14
The sleeve can be removed quickly to clean. Simply remove the velcro bands and lift the sleeve off the metal frame. Remember to wash your device to avoid bacteria growth and avoid urinary tract infections. Do not use harsh chemicals, only mild dish soap or hand soap.
This product has no reviews yet.